RSA Approved Driving Instructor • DublinTue–Fri 10:00–20:00 • Sat 10:00–16:00
Pass with AJ Driving School • Category B

Irish Driving Test Questions & Answers

Practise Rules of the Road, road signs, vehicle safety checks and controls for the Irish practical driving test.

Preparing for your practical car driving test? These are original practice questions written to help you understand the subjects examiners may assess. They are not a leaked, official or complete list of RSA examiner questions, and the wording on your own test can differ.

What does the current RSA procedure say?

The RSA's 23 June 2026 standard procedures specify 14 Rules of the Road questions: 6 verbal questions, 6 road signs and 2 hand signals. At the vehicle, the tester selects 3 technical-check topics and asks you to demonstrate 3 secondary controls. These are separate parts of the assessment, not 14 questions plus a fixed set of 14 vehicle checks.

For your exam, revise the latest official Rules of the Road and check your test vehicle and documents using the RSA checklist.

Important: Independent Pass with AJ guides. Not affiliated with or endorsed by the RSA. Understand each answer and practise checking the actual car you will use for your test.

Part 1 of 4

Rules of the Road – practice questions

Read the question and AJ's explanation below.

What should you do when approaching a pedestrian crossing?

Look well ahead, reduce speed when needed, watch for people about to cross and give way as required by the crossing type and signals. Never overtake a vehicle stopped at a crossing.

What does a steady amber traffic light mean?

Stop unless you are so close to the stop line that stopping safely would not be possible. Do not accelerate to beat the light.

When should you dip your headlights?

Dip headlights when you could dazzle an oncoming road user or someone ahead, and whenever the road or traffic situation requires it.

What should you do at a STOP sign?

Come to a complete stop at the correct line or location, make effective observations, and move only when it is safe and you can give way as required.

What does a GIVE WAY sign require?

Slow down and be prepared to stop, giving way to traffic that has priority. Only proceed when it is safe.

What should you do when approaching a yellow box junction?

If you are turning right, you may enter the yellow box and wait for a safe gap in oncoming traffic, provided you do not block traffic that has the right of way. Complete your turn only when it is safe. Otherwise, do not enter a yellow box junction unless you can clear it without stopping. At railway level crossings and tramway crossings, never enter a yellow box unless you can leave it without stopping.

Source: RSA Rules of the Road – Yellow Box Junctions.

How do you approach a roundabout safely?

Check the advance signs, lane markings and traffic. Slow down early, select the appropriate lane, give way as required, and use correct observations and signals. AJ uses second gear and approximately 20–25 km/h as a teaching example when approaching an ordinary roundabout, where conditions allow, so you are prepared to either proceed or stop safely. This is not a fixed RSA speed or gear requirement. You may need to slow down further or come to a complete stop.

When should you check your mirrors?

Check your mirrors regularly to maintain awareness of the traffic around you, especially before turning left or right, changing speed, changing lanes, or adjusting your road position. When changing lanes, use the Mirror–Signal–Mirror (MSM) routine: check your mirrors, signal your intention, and check your mirrors again. Then check the appropriate blind spot, if it is safe to do so, before moving into the new lane. Only move into the new lane when it is safe to do so. Remember: A mirror check does not replace a blind-spot check. However, you should ONLY check your blind spot when it is safe to do so.

What is the safest way to deal with a developing hazard?

Notice it early, anticipate what others might do, adjust speed and position, and keep space and options available.

What should you do if you are unsure who has priority?

Do not guess or force your way through. Slow or stop if necessary, observe carefully and proceed only when safe.

Part 2 of 4

Road signs and hand signals

Read the question and AJ's explanation below.

How do you recognise a regulatory road sign?

Learn the individual sign rather than relying only on shape or colour. Many prohibitory signs use a red circle, while a STOP sign is octagonal.

What does a yellow diamond-shaped warning sign mean in Ireland?

It warns of a hazard or a change in road conditions ahead. Standard warning signs in Ireland are normally yellow diamonds or rectangles with black borders and symbols. Identify the hazard early, and adapt your observations, speed and position as necessary. Roadworks warning signs are orange.

What does a blue mandatory-direction sign mean?

It tells drivers to follow the direction or action shown, subject to the sign's meaning and context.

What does a No Entry sign mean?

Vehicles must not enter the road or access from that direction.

What does a speed limit sign tell you?

The speed shown is a maximum legal limit, not a target. Drive at a lower speed if weather, visibility, road conditions or traffic flow require it. Never exceed the speed limit to keep up with other vehicles.

What does a pedestrian-crossing warning sign mean?

A pedestrian crossing is ahead. Look for people approaching or using the crossing, reduce speed as appropriate and be prepared to give way or stop.

Why do you need to demonstrate hand signals?

The RSA practical test can include hand signals. Practise the exact movements shown in the official Rules of the Road. These illustrations are more reliable than a short written description.

Where should you revise the exact official road sign and hand signal illustrations?

Use the RSA's Rules of the Road. It includes the correct illustrations for signs and hand signals. Refer to the complete official illustrations.

Part 3 of 4

Vehicle technical checks – questions you might practise

Read the question and AJ's explanation below.

How would you check the tyres?

Park on level ground and check each tyre for cuts, bulges, uneven wear and the correct inflation pressure. The minimum permitted car tyre tread depth is 1.6 mm across the central three-quarters of the tread and around the full circumference. Look for the small raised tread-wear indicator bars in the main grooves. When the tyre surface is level with these bars, it has reached approximately 1.6 mm and should be replaced. A tread-depth gauge gives a more accurate measurement. Replacing tyres before they reach the legal minimum is safer.

How would you check the indicators?

Operate the left and right indicators. Check that the relevant front, rear and side lamps (where fitted) flash correctly. Ask someone to check from outside or, where safe and suitable, look for their reflection in a nearby wall or window.

How would you check the brake lights?

While safely parked, press the brake pedal and check the red brake lights using their reflection in a nearby wall or building window. Alternatively, ask another person to stand safely behind the vehicle and confirm that the brake lights are working.

How would you check the engine oil?

Park on level ground, switch off the engine and allow the oil to settle. Make sure the engine is cool, or follow the vehicle manufacturer's instructions for checking the oil level. If the car has a dipstick, remove it, wipe it clean, insert it fully, then remove it again. Check that the oil level is between the MIN and MAX marks. Some cars use an electronic oil-level display instead.

How would you check the engine coolant?

With the engine cool, inspect the expansion tank against the MIN/MAX marks. Never open a hot, pressurised cooling system.

How would you check the windscreen washer system?

Check the washer fluid level and confirm the washers and wipers operate correctly and clear the screen.

How would you check the brakes?

Check that the footbrake pedal feels firm and that the brakes operate normally. The handbrake or parking brake should hold the vehicle securely. To check brake fluid, identify the reservoir under the bonnet and make sure its level is between the MIN and MAX marks, without opening the cap. Low fluid or abnormal brake operation requires professional attention before driving.

How would you check the steering?

With the vehicle safely stationary, check for any steering warning lights or unusual stiffness. When moving slowly in a safe area, check that the steering responds normally, without excessive free play or unusual noises.

How would you check the horn?

Know where the horn control is and how it works. Only sound it when lawful and appropriate. You do not need to create unnecessary noise to explain how the horn operates.

How would you check lights and reflectors?

Park the vehicle safely, switch on the sidelights, get out of the car and walk around to check that they are working correctly. Repeat the process for the dipped headlights, main beam, indicators and fog lights (where fitted), checking each light separately. To check the brake lights, ask another person to help or use their reflection in a nearby wall or window while pressing the brake pedal. Finally, inspect all lights and reflectors to make sure they are clean, undamaged and clearly visible.

Part 4 of 4

Secondary controls – know your actual car

Read the question and AJ's explanation below.

How would you operate the windscreen demister?

Locate the front windscreen demist setting, direct airflow onto the windscreen and use the fan, warm air and air-conditioning as appropriate to clear mist. Practise using the exact controls fitted to your test car.

How would you operate the rear window demister?

Identify the rear heated-window control, switch it on and explain that it clears mist from the rear glass. Switch it off when no longer needed.

Can you identify and operate the rear fog light?

Identify the rear fog-light switch and its amber dashboard indicator. Demonstrate how to switch the rear fog light on and off using the controls fitted to your vehicle.

How would you operate the windscreen wipers and washers?

Show how to select intermittent, low and high wiper speeds and activate the front washer. If the vehicle has a rear wiper and washer, identify and demonstrate these too. Know how to use the controls safely when rain or dirt reduces visibility.

How would you adjust the ventilation and temperature?

Identify the temperature, fan-speed, air-direction and ventilation controls. Explain how to keep the windscreen clear and a comfortable cabin without distraction.

What else should you check before leaving for the RSA test?

Check that your learner permit is valid, the vehicle is roadworthy and meets the current RSA driving-test requirements, and the required insurance and tax evidence is available. Check the exact test centre, appointment time, L-plates, tyres, lamps, wipers, mirrors and any NCT requirements.

Official sources and further preparation

Our explanations are based on the RSA's Standard Procedures for Conducting Driving Tests (23 June 2026), Rules of the Road, and official preparation booklets. Always follow the current RSA materials where details change.

For more help preparing for your practical driving test, explore these guides: