RSA Approved Driving Instructor • DublinTue–Fri 10:00–20:00 • Sat 10:00–16:00 • Sun–Mon Closed
PASS WITH AJ · LEARNER DRIVER RESOURCES

10 Common Reasons People Fail the Driving Test in Ireland

Find out where candidates can go wrong, what those faults mean on real roads, and how to reduce the risk through safer driving habits and better preparation.

Based on RSA guidance

Ten recurring categories of driving test difficulty.

Practical explanations

Understand how each type of fault can arise on the road.

Steps to improve

Use observation, planning and consistent practice.

Your next step

Identify the situations you need to practise before your test.

Why do driving test candidates fail?

The RSA identifies ten recurring reasons candidates are unsuccessful. They cover observation, anticipation, positioning, making safe progress, mirrors and signals, traffic rules, controls, speed, priority and manoeuvres. Every result depends on actual performance and the severity and pattern of faults. Knowing this list alone does not guarantee a pass.

1. Inadequate observation

What can go wrong?

Insufficient checks before moving off, approaching or entering junctions and roundabouts, or changing lanes. For example, failing to notice a cyclist or vehicle approaching from another direction.

How to improve

Before moving off, turning, changing lanes or entering a junction, check the relevant areas, identify who may be affected and only proceed when the situation is safe.

2. Failure to anticipate other drivers

What can go wrong?

Not recognising early signs that another road user may stop, emerge, turn or change lanes. Effective planning gives you time to respond without abrupt braking or steering.

How to improve

Look further ahead for brake lights, road positioning and emerging hazards. Respond early rather than waiting until another road user forces a sudden reaction.

3. Incorrect road position

What can go wrong?

Incorrect placement on straight roads, bends, left and right turns, roundabouts or while overtaking. Poor positioning can reduce visibility, obstruct others or put the car in conflict with oncoming traffic.

How to improve

Approach bends, junctions and turns in a suitable position. Choose your lane early, respect road markings and keep safe clearance when passing.

4. Inadequate progress

What can go wrong?

Hesitating when it is safe to proceed at junctions, roundabouts, on straight roads, or when overtaking and passing. Safe progress means moving confidently when a suitable opportunity exists, not rushing.

How to improve

When the view and priority are clear, take an appropriate safe opportunity. Build judgement through practice rather than assuming that moving very slowly is always safest.

5. Incorrect mirrors or signals

What can go wrong?

Missing, poorly timed or inappropriate mirror checks or indicators. Mirror checks should support decisions, and signals should communicate intentions clearly without misleading others.

How to improve

Check the mirrors that matter before changing speed or direction. Signal clearly when needed and avoid indicating so early or late that you mislead other road users.

6. Non-compliance with traffic controls

What can go wrong?

Failing to obey traffic lights, STOP and YIELD signs, speed limits or road and lane markings. Read and respond to the controls before reaching the decision point.

How to improve

Read signs, traffic lights, lane arrows and markings early. Give yourself time to understand priority and comply before reaching the decision point.

7. Incorrect use of vehicle controls

What can go wrong?

Poor or unsuitable use of gears, clutch, accelerator, steering, handbrake, footbrake or secondary controls. These faults can affect smoothness, vehicle stability or road awareness.

How to improve

Practice smooth control of the clutch, gears, steering, brakes and handbrake so that control tasks do not distract from observation and decisions.

8. Excessive speed for conditions

What can go wrong?

Driving too fast for the road or traffic situation, even if below the posted limit. Adjust to visibility, surface condition, pedestrians, bends and the space available.

How to improve

Choose speed for the actual situation, not just the legal limit. Leave enough time and distance to deal with a bend, a pedestrian, a parked car or an unexpected hazard.

9. Failure to yield right of way

What can go wrong?

Not giving way when another road user has priority, for example at junctions or when entering a roundabout. Check carefully before committing to a manoeuvre.

How to improve

Identify whose path you would cross and who has priority. Look and assess properly before entering a junction, roundabout or another road user's path.

10. Lack of competence in manoeuvres

What can go wrong?

Insufficient observation, steering control, judgement or positioning when reversing around a corner or performing a turnabout. Maintain control throughout the entire manoeuvre.

How to improve

Practise reversing and turning about slowly, with effective all-round observation. Be ready to pause if another road user approaches and keep control throughout.

Also preparing for your test day?

For eligibility, interpreters, vehicle checks, what happens during the test and the examiner's assessment, see our separate Irish Driving Test Guide.

Read the Irish Driving Test Guide

Official RSA information

For official test preparation materials, including the RSA’s Preparing for Your Driving Test booklet.

Visit RSA publications

Practise Irish driving test questions

Revise example Rules of the Road questions, signs and vehicle checks with AJ's Practical Driving Test Questions & Answers.